Tenesix inc. Tenesix Inc.
ASICS & FPGA Consultants For Networking

HomeFeedbackContentsSearchCareers
 
 

Products

 ( Note : You will need Adobe Acrobat Reader 4.0 to view the pdf formatted product briefs. )

DS3 Generator & Analyzer

E3 Generator & Analyzer

DS3 over SONET Generator & Analyzer

E3 over SONET Generator & Analyzer

DS3 eVC

SPI-3 Link Layer eVC

SPI-3 PHY Layer eVC
 

 

DS3 Generator and Analyzer 
The DS3 traffic generator and analyzer are programmable non-synthesizable VHDL components that generate and analyze ANSI T1.107-1995 compliant DS3 frames. They are highly configurable to support a wide variety of applications.

E3 Generator and Analyzer 
The E3 traffic generator and analyzer are programmable non-synthesizable VHDL components that generate and analyze ITU-T G.707 compliant G.751, G.832 and ETS.300.214 frames. They are highly configurable to support a wide variety of applications. 

DS3 over SONET Generator and Analyzer 
The DS3 traffic over SONET generator and analyzer are programmable non-synthesizable VHDL components that instantiate the DS3 generators and analyzers to provide DS3 over STS-n SONET frames.
 

E3 over SONET Generator and Analyzer 
The E3 traffic over SONET generator and analyzer are programmable non-synthesizable VHDL components that instantiate the E3 generators and analyzers to provide DS3 over STS-n frames.
 

DS3 eVC
The DS3 eVC is used to inject ANSI T1.107-1995 compliant DS3 formatted data into a Device Under Test (DUT) or to monitor DS3 formatted data from a DUT. The payload within the DS3 frame may be HDLC, ATM, or ATM PLCP formatted. 
 

SPI-3 Link Layer eVC
The SPI-3 eVC emulates the Link Layer Device in both the ingress and egress directions and is used to connect to a Multi-Port Physical Layer (PHY) Device Under Test (DUT). The SPI-3 eVC is OIF-SPI3-01.0 2000 compliant and is used to inject ATM Cells or Packet (payload only) data into a SPI-3 PHY DUT and to monitor ATM Cells or Packet data from a SPI-3 PHY DUT. Each channel on the eVC can be configured to carry either ATM cells or Packet data. 

SPI-3 PHY Layer eVC
The SPI-3 eVC emulates the PHY Layer Device in both the ingress and egress directions and is used to connect to a Multi-Port Link Layer Device Under Test (DUT). The SPI-3 eVC is OIF-SPI3-01.0 2000 compliant and is used to inject ATM Cells or Packet (payload only) data into a SPI-3 Link Layer DUT and to monitor ATM Cells or Packet data from a SPI-3 Link Layer DUT. Each channel on the eVC can be configured to carry either ATM cells or Packet data. 

[ Home ] [ News ] [ Products ] [ Services ]
Send mail to webmaster@tenesix.com with questions or comments about this web site.
Copyright 2001 Tenesix Inc.
Last modified: November 21, 2001